Access

Publications - By Topic

Process Simulation

  • Schmitz, G.J., Böttger, B., Apel, M.
    On the role of solidification modelling in Integrated Computational Materials Engineering ICME
    4th International Conference on Advances in Solidification Processes (ICASP-4) 8–11 July 2014, Windsor, UKIOP Conference Series: Materials Science and Engineering 117,1, 012041, 6 Seiten (2016) [10.1088/1757-899X/117/1/012041]
  • Behnken, H., Bähr, T., Dadzis, K., Kropfgans, F., Sylla, L., Richter, T.
    Measurement of Residual Stresses in Large Silicon Samples using the Dissection Method
    Vortrag auf 32.EU-PVSEC München 2016, 2CO1.1
  • Dadzis, K., Behnken, H., Bähr, T., Sylla, L., Richter, T.
    Numerical Simulation of Stresses ans Dislocations in Quasi-Mono-Silicon
    J.Crystal Growth, Vol. 450 (2016), 14-21
  • Jakumeit. J, Behnken, H., Schmidt, F., Gänz, J., Thorwald, B., Mathes, M.
    SIMULATION OF AIR ENTRAINMENT IN HIGH PRESSURE DIE CASTING APPLICATIONS
    CFD Modeling and Simulation in Materials Processing 2016: Edited byLaurentiu Nastac, Lifeng Zhang, Brian G. Thomas, Miaoyong Zhu, Andreas Ludwig, Adrian S. Sabau, Koulis Pericleous, and Hervé Combeau, TMS (The Minerals, Metals & Materials Society), 2016
  • Schmitz, G.J., Engstrom, A., Bernhardt, R., Prahl, U., Adam, L., Seyfarth, J., Apel, M., Agelet de Saracibar, C., Korzhavyi, P., Ågren, J., Patzak, B.
    Software Solutions for ICME.
    JOM: A publication of the Minerals, Metals & Materials Society (TMS) 68(1), 70-76 (2016) [10.1007/s11837-015-1718-8]
  • Schmitz G. J.
    Improved interoperability between commercial and academic modeling tools
    Presented at the meeting of the European Materials Modeling Council (EMMC), Brussels, February 2015
  • Schmitz G. J.
    Integrated Computational Materials Engineering ICME - Benefits, needs and actual developments
    Invited presentation at the 1st International Workshop for structural materials for innovation, Tokyo, Japan February 2015
  • Schmitz G. J., Boettger B., Apel M.
    Microstructure Modeling in ICME Settings
    Accepted for publication: 3rd World Congress on Integrated Computational Materials Engineering, Colorado Co, June 2015
  • Jakumeit J., Subasic E., Buenck M.
    Prediction of Misruns in Thin Wall Castings Using Computational Simulation
    Shape Casting 5th International Symposium 2014: proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidfication Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) held during TMS 2014, 143rd Annual Meeting & Exhibition, Februrary 16-20, 2014, San Diego Convention Center, San Diego, California, USA / edited by Murat Tiryakioglu, John Campbell, Glenn Byczynski. 2014 TMS Annual Meeting & Exhibition, Symposium:Shape Casting: 5th International Symposium 2014, TMS 2014, San Diego, USA, 02/16/2014 - 02/20/2014 253-260
  • Schmitz G. J., Prahl U.
    ICMEg: the Integrated Computational Materials Engineering expert group, a new European Coordination action
    Integrating materials and manufacturing innovation 3(2)
  • Schmitz G. J., Apel M., Boettger B.
    On the role of solidification modeling in ICME settings
    ICASP4, Old Windsor 2014, 3:2, accepted for publication.
  • Schmitz Georg J., Prahl Ulrich
    ICMEg: the Integrated Computational Materials Engineering expert group, a new European Coordination action.
    - InBuch. - Online
  • Mehdizadeh A., Jana Santhanu, Sadiki A.
    Assessment of ability of RANS based turbulence models to predict the mould filling process and oxide film formation in aluminum casting
    Progress in computational fluid dynamics. - Milton Keynes : Inderscience Enterprises. - ISSN: 1468-4349. - 13 (2013) 1, S./Art.: 20-33
  • A. Mehdizadeh, S. Jana, A. Sadiki
    Assessment of ability of RANS based turbulence models to predict the mould filling process and oxide film formation in Aluminum casting
    Progress in Computational Fluid Dynamics, Vol. 13, No. 1, 2013
  • Bambach Markus, Schmitz Georg J., Prahl Ulrich
    ICME: a mere coupling of models or a discipline on its own? John Wiley&Sons
    In: Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME): TMS... (2013), 285-290. - InProceedings. - Druck
  • Jana S., Jakumeit J., Tiefers R., Stoyanov T.
    Simulation of Cold Shuts and Misruns in Centrifugal Casting of TiAl Low Pressure Turbine Blades, Light metals technology 2013: Elektronische Ressource
    selected, peer reviewed papers from the Sixth International Light Metals Technology Conference (LMT2013), July 24 - 26, 2013, Old Windsor
  • Laschet G., Henke T., Shukla M., Fayek P., Prahl U. and Bambach M.
    'Multi-scale U-O forming simulation of a ferrite/pearlite pipeline tube with effective anisotropic flow curves', Modelling of process chains and interfaces for sheet metal forming
    6th Forming Technology Forum, September 19th - 20th, 2013, Herrsching, Germany S.1-8.
  • Schmitz G.J. and Prahl U.
    'ICMEg - the Integrated Computational Materials Engineering expert group - a new European Coordination action', Proceedings of the CoE conference of the Cluster of Excellence 'Integrative Production in High Wage Countries'
    Aachen. Oct. 2013
  • Schmitz Georg J., Prahl Ulrich [Hrsg.]
    Integrative computational materials engineering
    concepts and applications of a modular simulation platform ed. by Georg J. Schmitz and Ulrich Prahl. - Weinheim : Wiley-VCH, 2012 ISBN 978-3-527-33081-2 ISBN 3-527-33081-X ISBN 978-3-527-64612-8 Buch, Herausgeberschaft [hsb999910286473]
  • Subasic Emir, Ivanov Todor, Buehrig-Polaczek Andreas
    Numerical Simulation of the Wax Injection Process
    Livarski vestnik. - Ljubljana. - ISSN: 0024-5135. - 2012 (2012) 59, S./Art.: 234-243
  • Subasic Emir, Laqua Romuald, Jana Santhanu, Behnken Herfried, Jakumeit Juergen, Hediger Fredy
    Application of moving meshes in numerical simulation of casting processes with STAR-Cast.
    Zbornik referatov 52. mednarodnega livarskega posvetovanja, Portoroz? 2012 = Conference proceedings 52nd International Foundry Conference Portoroz? 2012 12.-14. September 2012. - Ljubljana : Drus?tvo livarjev Slovenije, 2012. - ISBN: 978-961-90130-7-6, S./Art.: 1/14-14/14
  • Baehr Thomas, Behnken Herfried, Lohan M., Hollatz M., Oriwol D.
    Residual Stresses in Multicrystalline Silicon: Test of Different Measurement Techniques and Comparison with Simulation Results
    Proceedings / EU PVSEC 2012 27th European Photovoltaic Solar Energy Conference and Exhibition : Messe Frankfurt and and Congress Center, Frankfurt, Germany, Conference 24 - 28 September 2012, Exhibition 25 - 28 September 2012 / ed. by S. Nowak .... - Muenchen : WIP Renewable Energies, 2012. - ISBN: 3-936338-28-0
  • Iwainsky Christian, Altenfeld Ralph, an Mey Dieter, Bischof Christian
    Enhancing Brainware Productivity through a Performance Tuning Workflow
    Euro-Par 2011 : parallel processing workshops: CCPI, CGWS, HeteroPar, HiBB, HPCVirt, HPPC, HPSS, MDGS, ProPer, Resilience, UCHPC, VHPC, Bordeaux, France, August 29-September 2, 2011: revised selected papers / Michael Alexander ... (eds.). - Berlin [u.a.] : Springer Pt. 2, 2012. - (Lecture Notes in Computer Science : 7155). - ISBN: 978-3-642-29739-7, 3-642-29739-0, 978-3-642-29740-3. - ISSN: 0302-9743, 1611-3349, S./Art.: 198-207
  • Jakumeit Juergen, Jana Santhanu, Boettger Bernd, Laqua Romuald, Jouani Mohammed Yamine, Buehrig-Polaczek Andreas
    Simulation-based prediction of micro-shrinkage porosity in aluminum casting: fully-coupled numerical calculation vs. criteria functions
    3rd International Conference on Advances in Solidification Processes JUN 07-10, 2011, NETHERLANDS. - Bristol [u.a.] : IOP Publishing, 2012. - (IOP Conference Series: Materials Science and Engineering : 27,1). - ISSN: 1757-8981, 1757-899X, S./Art.: 012066
  • Jakumeit Juergen, Jana Santhanu, Waclawczyk T., Mehdizadeh A., Sadiki A., Jouani Mohammed Yamine
    Four-phase fully-coupled mold-filling and solidification simulation for gas porosity prediction in aluminum sand casting.
    MCSWASP XIII: International Conference on Modeling of Casting, Welding and Advanced Solidification Processes 17-22 June 2012, Schladming,Austria. - Bristol : IOP Publishing [u.a.], 2012. - (IOP Conference Series : Materials Science and Engineering : 33,1). - ISSN: 1757-8981, 1757-899X, S./Art.: 012074, 10 S.
  • Jana Santhanu, Kaettlitz Oliver, Hediger Fredy, Jakumeit Juergen, Aguilar Julio
    Predictions of misruns using three-phase coupled mold-filling and solidification simulations in low pressure turbine (LPT) blades.
    13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP) Schladming, Austria, Jun 17-22, 2012. - Bristol : IOP Publishing [u.a.], 2012. - (IOP conference series / Materials science and engineering : 33). - ISSN: 1757-8981, 1757-899X, S./Art.: 012007, 8 S.
  • W. Michaeli, C. Hopmann, K. Bobzin, T. Arping, T. Baranowski, B. Heesel, G. Laschet, T. Schlaefer, M. Oete
    Development of an integrative simulation method to predict the microstructural influence on the mechanical behaviour of semi-crystalline thermoplastic parts
    International journal of materials research : IJMR. -Muenchen: Hanser- ISSN: 1862-5282, 0179-4841. -103 (2012) 1, S./Art.: 120-130
  • C. Iwainsky, R. Altenfeld, D. an Mey, C. Bischof
    Enhancing Brainware Productivity through a Performance Tuning Workflow
    Euro-Par 2011 : parallel processing workshops: CCPI, CGWS, HeteroPar, HiBB, HPCVirt, HPPC, HPSS, MDGS, ProPer, Resilience, UCHPC, VHPC, Bordeaux, France, August 29-September 2, 2011// revised selected papers / Michael Alexander ... (eds.). -Berlin [u.a.]: Springer Pt. 2, 2012. -(Lecture Notes in Computer Science , 7155).- ISBN: 978-3-642-29739-7, 3-642-29739-0, 978-3-642-29740-3.- ISSN: 0302-9743, 1611-3349., S./Art.: 198-207
  • J. Jakumeit, S. Jana, T. Waclawczyk, A. Mehdizadeh, A.Sadiki, J. Jouani
    Four-phase fully-coupled mold-filling and solidification simulation for gas porosity prediction in aluminium sand casting
    MCWASP XIII Iop Publishing, IOP Conf. Series: Materials Science and Engineering 33 (2012)
  • S. Jana, O. Kaettlitz, F. Hediger, J. Jakumeit and J. Aguilar
    Prediction of misruns using three-phase coupled mold-filling and solidification simulations in low pressure turbine (LPT) blades
    MCWASP XIII Iop Publishing, IOP Conf. Series: Materials Science and Engineering 33 (2012)
  • D. Daloz, U. Hecht, J. Zollinger, H. Combeau, A. Hazotte, M. Zaloznik
    Microsegregation, macrosegregation and related phase transformations in tial alloys
    Intermetallics. -Barking: Elsevier Science Publ.- ISSN: 0966-9795. -19 (2011) 6 Special Issue: SI, S./Art.: 749-756
  • H. Behnken, R. Hatmann, A. Aderhold
    Simulation of stress and Deformation in growing string-ribbon Silicon
    veröffentlicht (mit Vortrag) auf der europäischen Photovoltaik Tagung, Hamburg
  • S. Benke, S. Freyberger, H. Quade, G. J. Schmitz, A. Bührig-Polaczek, E. Westhoff
    Through process simulation of manufacturing and service life of high-precision cast parts made from austenitic stainless steel
    in Int. of Multiphysics (special edition), Multi-Science Publishing, Essex, 2011, Page 199-208, ISBN 978-1-907132-36-0
  • G. J. Schmitz, S. Benke, G. Laschet, M. Apel, J. Rosenbaum, U. Prahl, P. Fayek, S. Konovalov, H. Quade, S. Freyberger, T. Henke, M. Bambach, T. Arping, T. Baranowski, B. Heesel, U. Eppelt, U. Jansen, E.Rossiter, B. Kuckhoff, T. Gries, M. Linke, T. Kashko, K. Bobzin, N. Bagcivan
    Integrative Prozessketten-Simulation für Werkstoff- und Fertigungstechnologien
    in Ch. Brecher (Hrsg.) Integrative Produktionstechnik für Hochlohnländer, DOI10.1007/978-3-642- 20693-1_2, Springer, (2011), pp.342-400
  • G. J. Schmitz, S. Benke, G. Laschet, M. Apel, U. Prahl, P. Fayek, S. Konovalov, J. Rudnizki, H. Quade, S. Freyberger, T. Henke, M. Bambach, E. A. Rossiter, U. Jansen, U. Eppelt
    Towards Integrative Computational Materials Engineering of Steel Components
    Production Engineering & Research, DOI 10.1007/s11740-011-0322-1
  • G. J. Schmitz
    Statement on Future Perspectives of ICME
    in L. Robinson (ed.) Member Views of Materials News, JOM 63 1, (2011), pp. 13-19
  • W. Michaeli, T. Arping, T. Baranowski, B. Heesel, K. Bobzin, N. Bagcivan, T. Kashko, G. Laschet
    Calculating part behaviour via process chain simulation
    Europ. Tools and Mould Making, March 2011, pp. 32-35
  • Ch.-A. Gandin, J. Blaizot, S. Mosbah, M. Bellet, G. Zimmermann, L. Sturz, D. J. Browne, McFadden, H. Jung, B. Billia, N. Mangelinck, H. Nguyen Thi, Y. Fautrelle, X. Wang
    Modeling of Heat and Solute Interactions upon Grain Structure Solidification
    Materials Science Forum, 649, pp. 189-198
  • A. Kartavykh, V. Ginkin, S. Ganina, S. Rex, U. Hecht, B. Schmitz, D. Voss
    Numerical study of convection-induced peritectic macro-segregation effect at the directional counter-gravity solidification of Ti–46Al–8Nb alloy
    Intermetallics, 2011, In Press, Corrected Proof, Available online 14 December 2010
  • H. Quade, P. Fayek, G. Laschet, T. Henke
    Multiscale simulation of the U and O-forming of a linepipe tube
    Proc. of 1st conf. on multiplysics, Bonn, 2010
  • G. J. Schmitz, S. Benke, G. Laschet, M. Apel, U. Prahl, P. Fayek, S. Konovalov, J. Rudnizki, H. Quade, S. Freyberger, T. Henke, M. Bambach, E. A. Rossiter, U. Jansen, U. Eppelt
    Towards Integrative Computational Materials Engineering of Steel Components
    in press: Production Engineering & Research
  • B. Boettger, S. Stratemeier, E. Subasic, K. Goehler, I. Steinbach, D. Senk
    Modelling of Hot Ductility during Solidification of Steel Grades in Continuous Casting – Part II
    Adv. Eng. Mater., 12, 2010, p 101-109
  • L. Giraldi, G. Laschet, M. Mathes
    Influence of the segmentation technique on the effective thermal conductivity of open-cell metallic foams
    Proc. of 4th Europ. Conf. on Comput. Mech., Paris, France, 2010, pp. 16-21
  • G. Laschet, H. Quade, T. Henke, H.-H. Dickert, M. Bambach
    Comparison of elasto-plastic multiscale analyses of the u-forming process of a steel linepipe tube
    Proc. of 4th Europ. Conf. on Coumput: Mech, Paris, France, 2010, pp. 16-21
  • D. Senk, S. Stratemeier, B. Boettger, E. Subasic, K. Goehler, I. Steinbach
    Modelling of Hot Ductility during Solidification of Steel Grades in Continuous Casting – Part I
    Adv. Eng. Mater., 12, 2010, p 94-100
  • S. Benke, S. Freyberger, B. Boettger, H. Quade, J. Rudnizki, U. Prahl, G. J. Schmitz, A. Buehrig-Polaczek, E. Westhoff
    Scale bridging through process simulation of manufacturing and service life of high-precision cast parts made from austenitic stainless steel
    presented IWCMM 2010, Loughborough, UK 8.-10.9.2010 (abstract) accepted for publication: Computational Materials
  • S. Benke, S. Freyberger, H. Quade, G. J. Schmitz, A. Buehrig-Polaczek, E. Westhoff
    Through process simulation of manufacturing and service life of high-precision cast parts made from austenitic stainless steel
    presented 1st conference on multiphysics simulation, Bonn Germany, June 2010 accepted: Int.Journal of Multiphysics
  • H. Behnken
    Simulation of the Development of Dislocation Density in Multi-Crystalline Silicon During Crystallisation Processes
    24th Eur. Photovoltaic Solar Energy Conf., Hamburg
  • M. Grauer, T. Barth, J. Reichwald, J. Jakumeit, J. Eiken
    Service-oriented multi-scale simulation and optimization of a metal casting process
    Proceedings of the 8th World Congress on Structural and Multidisciplinary Optimization, (June 2009, Lissabon, Portugal)
  • S. Benke, S. Freyberger, E. Westhoff, G.J. Schmitz
    Prozessuebergreifende Simulation der Herstellung von hochpraezisionsbearbeiteten Bauteilen aus hochlegiertem Edelstahl
    Artikel Konferenzband NAFEMS Seminar Multidisziplinaere Simulation, Wiesbaden, November 09 – 10
  • S.S. Khan, N. Hort, J. Eiken, I. Steinbbach, S. Schmauder
    Numerical Determination of Heat Distribution and Castability Simulations of as Cast Mg-Al Alloys.
    Advanced Engineering Materials 11 (2009,) Issue: 3, pp. 162-168
  • S. Jana, J. Jakumeit, M. Y. Jouani
    Numerical Predictions of Gas Porosity in Casting Processes using Fully Coupled Mold-filling and Solidification Simulation.
    Proceedings of the XII conference on Modelling of Casting, Welding and Advanced Solidification processes , Vancouver 2009
  • J. Jakumeit, K. Goodheart, M. Albers
    Influence of the Gas Phase on Mold Filling for Sand Casting.
    Proceedings of the XII conference on Modelling of Casting, Welding and Advanced Solidification processes , Vancouver, 2009
  • H. Behnken, M. Mathes, I. Westram, M. Müller, A. Seidl
    Integrated Simulation Model for a Newly Developed Silicon Ingot Casting Unit: Temperatures, Stresses, Dislocations, Impurity Segregation and Diffusion.
    23nd European Photovoltaic Solar Energy Conference, Valencia, Spain, 2008, pp. 1260-1263
  • U.Prahl, G.J.Schmitz, W.Bleck
    Aix-ViPMaP: Entwicklung einer virtuellen Plattform zur Prozessmodellierung von Werkstoffen.
    ASK, Aachener Stahlkolloquium, 23 (2008), S. 135-149
  • S. Benke, G. Laschet
    On the interplay between the solid deformation and fluid flow during the solidification of a metallic alloy
    Computational Materials Science 43 (2008), pp. 92-100
  • R. Mahnken, I. Caylak, G. Laschet
    Two mixed finite element formulations with area bubble functions for tetrahedral elements.
    Computer Methods in Applied Mechanics and Engineering 197 (2008), no. 3-4, pp 1147-1165
  • G. Laschet
    Fochheimer law derived by homogenization of gas flow in turbomachines
    Journal of Computational and Applied Mathematics, Vol. 215 (2008), pp. 467-476
  • G. Laschet, S. Rex
    Effective Thermoelastic Properties of Flat and Curved Transpiration Cooled Multilayer Plates via Homogenization.
    Proceedings of the ASME Turbo Expo 4 (2008), PTS A AND B, pp. 1757-1768
  • S.Benke, G. Laschet
    On a class of Thermo-visco-plastic constitutive equations for semi-solid alloys.
    Solid State Phenomena 142-143 (2008), pp. 653-658
  • J. Jakumeit, R. Laqua, U. Hecht, K. Goodheart, M. Peric
    Coupled mould filling and solidification simulation applied to centrifugal casting of TiAl parts
    Proceedings of the 5th Decennial International Conference on Solidification Processing SP07 (Sheffield, 23-25 July, 2007), pp. 292-296
  • J. Jakumeit, T. Barth, M. Grauer, J. Reichwald, M. Smith, K. Dörnemann, B. Freisleben
    Grid based numerical optimization of casting processes
    Proceedings of the 5th Decennial International Conference on Solidification Processing SP07 (Sheffield, 23-25 July, 2007), pp. 488-492
  • R. Mahnken, I. Caylak, G. Laschet
    Area bubble functions for stabilization of mixed finite tetrahedral elements
    Proceedings of the Fifteenth UK Conference of the Association of Computational Mechanics in Engineering (Glasgow, 2-3 April, 2007), p. 39
  • T. Barth, K. Dörnemann, T. Dörnemann, B. Freisleben, T. Friese, M. Grauer, J. Jakumeit, C. Lütke Entrup, J. Reichwald, C. Schridde, M. Smith, F. Thilo
    Supporting engineering processes utilizing service-oriented grid technology
    Proceedings of the German e-Science Conference 2007, Baden-Baden, pp. 1-10 (angenommener Beitrag zur German EScience Conference (GES) 2007, 2.-4.5.2007 in Baden Baden.)
  • H. Kasjanow, A. Nikanorov, B. Nacke, H. Behnken, D. Franke, A. Seidl
    3D coupled electromagnetic and thermal modelling of EFG silicon tube growth
    Journal of Crystal Growth 303 (2007) 1-2, pp. 175-179
  • G. Laschet, S. Rex, D. Bohn, R. Krewinkel
    3-D numerical analysis of curved transpiration cooled plates and homogenization of their aerothermal properties
    Journal of Turbomachinery, Vol. 129, No. 4 (2007), pp. 791-799
  • T. Bähr, H. Behnken, J. Henker, A. Müller
    Integrated simulation model for a newly developed silicon ingot casting unit: temperatures, stresses, dislocations, impurity segregation and diffusion
    Proceedings of the 22nd European Photovoltaic Solar Energy Conference (Milan, Italy, 3-7 September, 2007), pp. 984-987
  • R. Mahnken, I. Caylak, G. Laschet
    Two mixed finite element formulations with area bubble functions for tetrahedral elements
    Computer Methods in Applied Mechanics and Engineering, vol. 197, no. 9-12 (2008), pp 1147-1165
  • S. Benke, S. Dziallach, G. Laschet, U. Prahl, W. Bleck
    Modeling of the tensile and compression behavior of semi-solid A356 alloy
    IWCMM 17 (17th International Workshop Computational Mechanics of Materials, Paris, August 22-24, 2007): Book of Abstracts, p. 27
  • J. Jakumeit, R. Laqua, M. Peric, E. Schreck
    Fully coupled multi-phase mold-filling and solidification simulation of industrial casting processes
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 63-70
  • T. Bähr, M. Apel, M. Ghosh
    Analysis of grain size and grain orientation in mc-Si wafer produced by ingot casting
    Proceedings of the 21th European Photovoltaic Solar Energy Conference, 4-6 September 2006, Dresden, pp. 584-587
  • G. Laschet, S. Rex, D. Bohn, R. Krewinkel
    3-D numerical analysis of curved transpiration cooled plates and homogenization of their aerothermal properties
    Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air, Volume: 3A, New York : ASME, 2006, pp. 395-406
  • S. Benke, G. Laschet
    A thermo-mechanical 2-phase finite element model for the coherent mushy zone relevant to casting
    Proceedings of the III. European Conference on Computational Mechanics, Structures and Coupled Problems in Engineering (Lisbon, June 5-8, 2006), ed. by C.A. Mota Soares (et al.), Springer Netherland (2006), p. 534
  • S. Benke
    Modeling of solid state transformations using a phase field model with transformation plasticity
    Proceedings of the III. European Conference on Computational Mechanics, Structures and Coupled Problems in Engineering (Lisbon, June 5-8, 2006), ed. by C.A. Mota Soares (et al.), Springer Netherland (2006), p. 57
  • J. Dagner, A. Weiß, M. Hainke, G. Zimmermann, G. Müller
    Global modeling of directional solidification processes of binary and ternary aluminum alloys using the software package CrysVUn
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 437-442
  • H. Behnken, D. Franke, H. Kasjanow, A. Nikanorov, A. Seidl
    3D-simulation of EFG process and deformation of the growing silicon tube
    2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, Waikoloa, Hawaii, 7 - 12 May 2006, pp. 1175-1178
  • H. Behnken, D. Franke
    Time dependent fracture behaviour in fast mechanical testing of silicon wafers
    2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, Waikoloa, Hawaii, 7 - 12 May 2006, pp. 1207-1210
  • J. Jakumeit
    Grid-basierte Simulation für die Gießerei-Industrie
    Grid Computing, ed. by T. Barth [et. al.], Wiesbaden : Vieweg, 2006, S. 133-142
  • J. Jakumeit, T. Barth, J. Reichwald, M. Grauer, F. Thilo, T. Friese, M. Smith, B. Freisleben
    A grid-based parallel otimization algorithm applied to a problem in metal casting industry
    International Conference on Bioinspired Optimization Methods and their Applications, BIOMA '06, Ljubljana, Slovenia, 2006, pp. 131-146
  • J. Jakumeit, M. Emmerich, F. Hediger
    Inverse modeling and numerical optimization of heater temperatures in a bridgman process
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 1019-1026
  • J. Jakumeit, T. Barth, M. Grauer, J. Reichwald
    Grid computing for casting simulations
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 1157-1162
  • G. Laschet, S. Benke
    On the thermo-mechanical modeling of the coherent mushy zone during solidification processes
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 177-184
  • G. Laschet
    Fochheimer law for gas flow in turbomachines via homogenization
    3. International Conference on Advanced Computational Methods in Engineering, ACOMEN-05, 30th May - 2nd June 2005, Ghent, Belgium, pp. 1-13
  • F. Scheppe, C. Obuna, B. Böttger, J. Jakumeit
    Prozeß - Gefüge - Eigenschaften: Die Simulation ein Optimierungstool
    Gießtechnik im Motorenbau. Düsseldorf : VDI-Verl. (VDI-Berichte ; 1830), S. 131-140
  • G. Laschet, S. Benke
    Thermomechanical two-phase modelling of the mushy zone during solidification in casting processes
    International Conference on Computational Methods for Coupled Problems in Science and Engineering COUPLED PROBLEMS 2005, ed. by M. Papadrakakis, pp. 1-20
  • H. Behnken, A. Seidl, D. Franke
    A 3D dynamic stress model for the growth of hollow silicon polygons
    Journal of Crystal Growth 275 (2005) 1-2, pp. e375-e380
  • H. Behnken, R. Tiefers, W. Krühler, A. Froitzheim, G. Hahn, D. Franke
    Influence of saw damage etching on the mechanical stability of multi-crystalline wafers
    Proc. 19th European Photovoltaic Solar Energy Conference and Exhibition, 07. -11.06.2004, Paris, pp. 1123-1126
  • P. Rakotoniaina, O. Breitenstein, M. H. Al Rifai, D. Franke, A. Schneider
    Detection of cracks in silicon wafers and solar cells by ultrasonic lock-in thermography
    Proc. 19th European Photovoltaic Solar Energy Conference, 7-11 June 2004, Paris, France, pp. 640-643
  • J. Jakumeit, M. Herdy, M. Nitsche
    Parameter optimization of the sheet metal forming press using an iterative parallel Kriging algorithm
    Structural and multidisciplinary optimization 28 (2004), pp. 1-10
  • G. Laschet, J. Jakumeit, S. Benke
    Thermo-mechanical analysis of cast/mould interaction in casting processes
    Zeitschrift für Metallkunde 95 (2004) 12, S. 1087-1096
  • D. Franke
    Möglichkeiten und Grenzen numerischer Simulation bei der Kristallzüchtung
    Halbleitermaterialien, Prozesstechnologie und Diagnostik. 54. Berg- und Hüttenmännischer Tag, [19. bis 21. Juni 2003]. Hrsg.: H.-J. Möller, Freiberg: Technische Universität Bergakademie Freiberg (Freiberger Forschungshefte ; 327) (2004), S. 56-58
  • J. Jakumeit, M. Emmerich
    Optimization of gas turbine blade castings using evolution strategies and Kriging
    International Conference on Bioinspired Optimization Methods and their Applications, BIOMA '04, Ljubljana, Slovenia, 2004, pp. 95-104
  • G. Laschet
    Homogenization of the fluid flow and heat transfer in transpiration cooled multi-layer plates
    Journal of Computational and Applied Mathematics 168 (2004) 1-2, pp. 277-288
  • G. Laschet, S. Rex
    Effektive Werkstoffeigenschaften poröser Schichtverbunde eines Mehrschalenverfahrens
    2. Workshop des SFB 561, Aachen, 2003, S. 27-32
  • H. Behnken, M. Apel, D. Franke
    Simulation of mechanical stress during bending tests for crystalline wafers
    3rd World Conference and Exhibition on Photovoltaic Energy Conversion (WCPEC3), May 11 - 18, 2003, Osaka, Japan, pp. 1308-1311
  • D. Franke
    Rise and dislocation density in crystalline silicon wafers during diffusion processing
    3rd World Conference and Exhibition on Photovoltaic Energy Conversion (WCPEC3), May 11 - 18, 2003, Osaka, Japan, pp. 1344-1347
  • L. Haas, G. Laschet
    3-d contact algorithm for thermomechanical analysis of casting processes
    7th U.S. National Congress on Computational Mechanics (USNCCM 7), Albuquerque, New Mexico, July 28 - 30, 2003, p. 221
  • R. Laqua, T. Ivas, J. Scheele, J. Jakumeit, M. Braun, M. Pelzer
    Mold filling and solidification simulations of investment casting processes using CASTS-FLUENT
    Eurotherm 69, Heat and Mass Transfer in Solid-Liquid Phase Change Processes, June 25-27, 2003, Ljubljana, Slovenia, pp. 133-141
  • W. Koch, A. Endrös, D. Franke, C. Häßler, J. P. Kaleis, H.-J. Möller
    Bulk crystal growth and wavering for PV
    Handbook of Photovoltaic Science and Engineering. Ed. by A. Luque [et al.], Wiley, 2003, pp. 205-255
  • L. Haas, G. Laschet, J. Jakumeit
    Thermomechanical simulation of investment casting processes
    Luxfem '03, 1st International Conference Finite Element for Process, 13-14 November 2003, Luxembourg, paper-no. 20
  • J. Jakumeit, R. Laqua, T. Ivas, J. Scheele, M. Braun, A. Mukhopadhyay, M. Pelzer
    Multidisciplinary coupled simulations of investment casting processes using CASTS-FLUENT
    Materials Science & Technology 2003, November 9 - 12, 2003, Chicago, Illinois, Session: Modeling,Control and Optimization in Nonferrous and Ferrous Industry, pp. 333-342
  • B. Pustal, B. Böttger, A. Ludwig, P. R. Sahm, A. Bührig-Polaczek
    Simulation of macroscopic solidification with an incorporated one-dimensional microsegregation model coupled to thermodynamic software
    Metallurgical and Materials Transactions B 34B (2003), pp. 411-419.
  • G. Laschet, S. Rex, D. Bohn, N. Moritz
    Homogenization of material properties of transpiration cooled multilayer plates
    Proceedings of the ASME Turbo Expo 2003. Volume 5A: Heat Transfer, New York : ASME, 2003, pp. 287-296
  • J. Neises, G. Laschet
    A stabilized hybrid FE/FV method applied to fluid flow in mold filling
    Revue européenne de éléments finis 12 (2003) 7-8, pp. 831-861.
  • T. Rettelbach, G. J. Schmitz
    3D-simulation of temperature, electric field and current density evolution in superconducting components
    Superconductor Science and Technology 16 (2003), pp. 645-653
  • E. S. Reddy, G. J. Schmitz
    Simulation des thermischen Verhaltens eines supraleitenden Strombegrenzersystems
    Supraleitung und Tieftemperaturtechnik, Tagungsband zum 8. Statusseminar 13. und 14. Februar 2003, Garmisch-Partenkirchen, Düsseldorf : VDI-Verl., 2003
  • A. Bührig-Polaczek, B. Pustal, B. Winartomo, J. Jakumeit, B. Böttger
    Simulation von Gießprozessen
    Symposium "Simulation in der Produkt- und Prozessentwicklung", 5. - 7. November, 2003, Berlin, S. 11-16
  • D. Franke
    Simulation of thermal stress and the influence of cracks on solar wafer breakage
    Proc. 17th European Photovoltaic Solar Energy Conference, 22.-26.10.2001, Munich, 2002, pp. 1830-1833
  • T. Rettelbach, D. Franke, A. Müller
    Numerical simulation of silicon melting and ingot crystallisation for process control and process development
    Proc. 17th European Photovoltaic Solar Energy Conference, 22.-26.10.2001, Munich, 2002, pp. 1834-1837
  • I. Steinbach, M. Apel, T. Rettelbach, D. Franke
    Numerical simulations for silicon crystallisation processes - examples from ingot and ribbon casting
    Solar Energy Materials and Solar Cells 72 (2002), pp. 59-68
  • D. Franke, T. Rettelbach, C. Häßler, W. Koch, A. Müller
    Silicon ingot casting: process development by numerical simluations
    Solar Energy Materials and Solar Cells 72 (2002), pp. 83-92
  • G. Laschet, S. Rex
    Effective permeabilities and thermal conductivities of transpiration cooled multilayer plates
    2nd International Conference on Advanced Computational Methods in Engineering (ACOMEN 2002), 28. - 31. 05.2002, Liege, Belgium, TH 08
  • G. Laschet
    Homogenization of the thermal properties of transpiration cooled multi-layer plates
    Computer Methods in Applied Mechanics and Engineering 191 (2002) 41-42, pp. 4535-4554
  • D. Franke
    Numerische Prozesssimulation am Beispiel der gerichteten Erstarrung von Solarsilicium
    Kristallisation und Technik. Vorträge zum 51. Berg- und Hüttenmännischen Tag, Freiberg, 14.-16. Juni 2000. Hrsg.: H.-J. Möller, Freiberg: Technische Universität Bergakademie Freiberg, 2002 (Freiberger Forschungshefte / B ; 321), S. 23-30
  • V. Plochikhine, H.-W. Zoch, V. A. Karkhin, H.-J. Diepers, I. Steinbach
    Multiscale modelling of laser beam welding. Part 1: macroscopic ans microscopic scale
    Kurzzeitmetallurgie. Handbuch zum Abschlußkolloquium des DFG Schwerpunktprogramms (Strahltechnik ; Bd. 18 ), G. Sepold (et al.) (Hrsg.), Bremen, BIAS-Verl., 2002, S. 33-40
  • G. Laschet, S. Rex, D. Bohn, N. Moritz
    3-d conjugate analysis of cooled coated plates and homogenisation of their thermal properties
    Numerical Heat Transfer A 42 (2002), pp. 91-106
  • G. Gottstein, R. Sebald, M. Goerdeler, H. Diepers, R. Prieler, G. Laschet, R. Luce, H. Aretz, R. Kopp
    Integral materials modelling - recent contributions of SFB 370
    7. Internationales Aachener Schweißtechnik Kolloquium, 03.-04.05.2001, Aachen. Hrsg.: U. Dilthey, Bd. 2, S. 797-816
  • D. Franke
    Numerische Simulation der Versetzungsmultiplikation in multikristallinem Silicium aus der gerichteten Blockkristallisation
    Aachen : Shaker, 2001 (Berichte aus der Halbleitertechnik), Dissertation RWTH Aachen 2001
  • Stemmler, Michael
    Numerische Simulation von Feingussprozessen mit Schwerpunkt auf Strömung und Formfüllung
    Aachen : Shaker, 2001 (Gießerei-Institut: Forschung, Entwicklung, Ergebnisse ; Bd. 29), Dissertation RWTH Aachen 2001
  • C. Häßler, G. Stollwerck, W. Koch, W. Krumbe, A. Müller, D. Franke, T. Rettelbach
    Multicrystalline silicon for high-efficiency solar cells: process development by numerical simulations
    Advanced Materials 13 (2001) 23, pp. 1815-1819
  • G. Laschet, S. Rex, D. E. Bohn, N. Moritz
    3-D Investigation of transpiration cooled coated plates and homogenisation of their thermal properties
    CHT '01, Advances in Computational Heat Transfer II, Palm Cove, Queensland, Australia, 20-25 May, 2001, pp. 551-558
  • D. Ma
    Herstellung und Simulation einer großen einkristallinen Turbinenschaufel
    Giessereiforschung 53 (2001) 1, S. 36-41
  • J. Neises
    Numerical modeling of incompressible flow applied to casting processes
    http:// sylvester.bth.rwth-aachen.de/dissertationen/2001/114/01_114.pdf - Dissertation RWTH Aachen 2001
  • D. Ma
    Discussion of "thermal and grain-structure simulation in a land-based turbine blade directionally solidified with the liquid metal cooling process"
    Metallurgical and Materials Transactions B 32B (2001) pp. 1212-1213
  • M.Schallmo, G. Laschet
    Thermal simulation and optimization of investment casting processes
    NAFEMS Seminar: Numerical Simulation of Heat Transfer, 9.-10. Mai 2001, Wiesbaden, pp. 17/1-14
  • J. Neises, Y. Delannoy, M. Medale, G. Laschet, M. Stemmler, G. Fontaine
    Modeling of free surfaces in casting processes
    Numerical Flow Simulation II. Ed. by E. H. Hirschel. (Notes on Numerical Fluid Mechanics ; Vol. 75) Springer : Berlin, 2001, pp. 116-126
  • J. G. Noudem, E. S. Reddy, M. Tarka, M. Noe, G. J. Schmitz
    Melt-texture joining of YBa2Cu3Oy bulks
    Superconductor Science and Technology 14 (2001) 6, pp. 363-370
  • T. Rettelbach, G. J. Schmitz
    HTSL-Begrenzer auf Massivmaterialbasis. Simulation des thermischen Verhaltens eines resistiven Strombegrenzersystems
    Supraleitung und Tieftemperaturtechnik, Tagungsband zum 7. Statusseminar 14. - 15. Dezember 2000, Garmisch-Partenkirchen, Düsseldorf : VDI-Verl., 2001, S. 413-416
  • D. Ma
    Entwicklung der Erstarrungsfront und Entstehung des Mikrogefüges bei gerichteter Erstarrung metallischer Schmelze
    Aachen : Shaker, 2000 (Berichte aus der Metallurgie), Habil.-Schr.
  • G. J. Schmitz
    Simulation of crystal growth in (Re)Ba2Cu3Ox
    12th International Symposium on Superconductivity (ISS '99), Morioka, Japan, Oct. 17-19, 1999, pp. 423-427
  • M. Balliel, D. Ma, F. Hediger
    Simulation and grain structure simulation of an equiaxed superalloy investment casting
    Euromat '99, Werkstoffwoche Materialica, München 27.-30.09.1999, Vol. 10. Intermetallics and Superalloys, D. G. Morris [ed.], Weinheim : Wiley-VCH 2000, pp. 115-120
  • M. Stemmler, M. Schallmo, F. Hediger
    Computational modeling of investment casting
    Euromat '99, Werkstoffwoche Materialica, München 27.-30.09.1999, Vol. 3, Microstructures, Mechanical Properties and Processes, Bréchet, Yves [ed.], Weinheim : Wiley-VCH 2000, pp. 286-292
  • D. Ma, U. Grafe
    Dendrite growth and microsegregation during directional solidification: an analytical model and experimental studies on the superalloy CMSX-4
    International Journal of Cast Metals Research 13 (2000) 2, pp. 85-92
  • F. Grote, M. Stemmler, S. Kaesberg
    Übertragung realer zellularer Strukturen auf 3D-FEM-Modell - Methoden und Potential
    Materialwissenschaft und Werkstofftechnik 31 (2000) 6, S. 455-458
  • M. Stemmler, G. Laschet, L. Haas, M. Schallmo, F. Hediger
    Simulation of investment casting: coupling of contact and heat transfer calculation between casting and mold during solidification
    Modeling of Casting, Welding and Advanced Solidification Processes IX. Ed. by P. R. Sahm (et al.), Aachen : Shaker, 2000, pp. 222-229
  • I. Wagner, I. Steinbach
    Structural supercooling in directional single crystal solidification: an experimental and numerical study
    Modeling of Casting, Welding and Advanced Solidification Processes IX. Ed. by P. R. Sahm (et al.), Aachen : Shaker, 2000, pp. 254-261
  • D. Franke, M. Apel, C. Häßler, W. Koch
    Effect of multicrystalline structure on dislocation multiplication in cast silicon
    Proc. 16th European Photovoltaic Solar Energy Conference, Glasgow, May 1-5, 2000, pp. 1317-1320
  • D. Franke, M. Apel
    Change of dislocation density in silicon wafers during thermal processing
    Proc. 28th IEEE Photovoltaic Specialists Conference, Anchorage, Alaska, USA, 19.-22.09.2000, pp. 237-240
  • G. Laschet, D. Ma. M. Schallmo
    Optimization of the material quality during the Bridgman casting process
    5th U.S. National Congress on Computational Mechanics (USNCCM99), Boulder, Colorado 4.-6.8.1999, pp. 471-472
  • D. Ma
    Modellierung des Dendritenwachstums und der Mikroseigerung bei gerichteter Erstarrung. Teil 3: Wachstum des Eutektikums im interdendritischen Bereich
    Giessereiforschung 51 (1999), S. 161-167
  • C. Theiler, E. Schubert, H.-J. Diepers, G. Laschet, R. Prieler, F. Hediger
    Simulation und experimentelle Untersuchungen beim Laser-Randschichtlegieren im System Fe-Al
    Handbuch zum DFG-Schwerpunkt Kurzzeitmetallurgie, Bayreuth : Deutsche Forschungsgemeinschaft, 1999, S. 185-204
  • C. Häßler, E.-U. Reisner, W. Koch, A. Müller, D. Franke, T. Rettelbach
    Low dislocation density multicrystalline silicon for photovoltaic applications
    Solid State Phenomena 67 - 68 (1999) pp. 447-452
  • J. Neises, G. Laschet
    A hybrid control volume method stabilized by bubble-functions applied to fluid flow in casting processes.
    5th U.S. National Congress on Computational Mechanics (USNCCM99), August 4-6, 1999, Boulder, Colorado, pp. 221
  • G. Laschet, H.-J. Diepers, R. Prieler
    Micro-macro simulation of a laser remelting process
    5th U.S. National Congress on Computational Mechanics (USNCCM99), Boulder, Colorado 4.-6.8.1999, pp. 133-134
  • M. Diemer, D. Franke
    Modeling of thermal stresses near the liquid-solid phase boundary
    Modeling of Casting, Welding and Advanced Solidification VIII. Ed. by B. G. Thomas, C. Beckermann, Warrendale: TMS 1998, pp. 907-914
  • J. Neises, I. Steinbach, Y. Delannoy
    Modeling of free surfaces in casting processes
    Numerical Flow Simulation I. Ed. by E. H. Hirschel. (Notes on Numerical Fluid Mechanics ; Vol. 66), Vieweg: Braunschweig, 1998, pp. 168-186
  • G. Laschet, J. Neises, M. Diemer
    Simulation of casting processes with CASTS
    Workshop at 4iéme école d´été, Modélisation numérique en thermique, Porquerolles, May 1998, S. A18.1-19
  • G. Laschet, J. Neises, I. Steinbach
    Micro- and macrosimulation of casting processes
    Lecture at 4éme école d'été, Modélisation numérique en thermique, Porquerolles, May 1998, C8. pp. 1-42
  • G. Laschet, M. Schallmo, N. Hofmann
    Optimization tools for Bridgman casting process
    Modeling of Casting, Welding and Advanced Solidification VIII. Ed. by B. G. Thomas, C. Beckermann, Warrendale: TMS 1998, pp. 1095-1102
  • D. Franke, C. Häßler, W. Koch, J. Liebermann
    Dislocation modeling in cast multicrystalline silicon
    2nd World Conference and Exhibition on Photovoltaic Solar Energy Conversion. Vienna, 06.-10.07.1998, pp. 108-111
  • G. Laschet, H.-J. Diepers, I. Steinbach
    Micro-macrosimulation of laser remelting of an aluminium coating on steel
    ECLAT '98, European Conference on Laser Treatment of Materials, Hannover 22.-23.09.1998, pp. 265-270
  • I. Wagner, M. Diemer, P. R. Sahm
    Makroskopische Erstarrungs- und Restspannungssimulation
    Workshop Hochwarmfeste Werkstoffe, 24.-25.2.1997, RWTH Aachen, S. 15-18
  • D. Franke, C. Häßler, W. Koch
    Numerical modelling of thermomechanical stress in silicon wafers during thermal processing
    14th European Photovoltaic Solar Energy Conference, Barcelona, 1997, Felmersham: Stephens, pp. 123-126
  • M. Seeßelberg, G. J. Schmitz, T. Wilke, M. Ullrich
    Simulation of thermal fields for the optimization of the melt-texturing process of HTSC bulk materials
    Applied Superconductivity 1997, proceedings of EUCAS 1997. Ed. by H. Rogalla, Bristol: Institute of Physics (Institute of Physics conference series ; 158), pp. 841-844
  • N. Hofmann, S. Olive, G. Laschet, F. Hediger, J. Wolf, P. R. Sahm
    Numerical optimization of process control variables for the Bridgman casting process
    Modelling and Simulation in Materials Science and Engineering 5 (1997) 1, pp. 23-34
  • D. Franke, I. Steinbach, W. Krumbe, J. Liebermann, W. Koch
    Concept for an online material quality control by numerical simulation of a silicon ingot solidification process
    Proc. 25th IEEE Photovoltaic Specialists Conference, Washington DC, 1996, pp. 545-548
  • D. Franke, I. Steinbach, W. Krumbe, J. Liebermann, W. Koch, H. J. Möller
    Thermal and microstructual modelling for cast silicon
    Proc. 6th Workshop on the Role of Impurities and Defects in Silicon Processing, Snowmass Village, 1996, p. 214-216
  • M. Seeßelberg, G. J. Schmitz
    Numerische Simulation der Temperaturverteilung bei der Erstarrung von YBaCuO in Bridgman- und VGF-Öfen
    Verbundtreffen Texturierte HTSL-Massivmaterialien, Steinfurt 1996, o.S.
  • G. Laschet
    Numerical strength predictions of adhesively bonded multimaterial joints
    AGARD 83rd SMP Specialists Meeting on Bolted/Bonded Joints in Polymeric Composites, 2-5 September, Florence, Italy, p. 11-20
  • J. Neises, I. Steinbach
    Finite element integration for the control volume method
    Communications in Numerical Methods in Engineering 12 (1996) 9, pp. 543-555
  • M. Meyer ter Vehn, M. Fackeldey, M. Diemer, P. R. Sahm
    Measurement and simulation of temperature and stress fields during the single crystal solidification of turbine blades
    Local strain and temperature measurements in non-uniform fields at elevated temperatures : proceedings of the symposium held at Berlin, Germany, 14 - 15 March 1996. Ed. by J. Ziebs, Cambridge: Woodhouse Publ. Ltd., 1996, pp. 243-252
  • M. Seeßelberg, D. Litzkendorf, M. Wu, G. J. Schmitz
    Erste Ergebnisse zur Numerischen Simulation der Temperaturverteilung bei der Erstarrung von YBaCuO
    Verbundtreffen Texturierte HTSL-Massivmaterialien, Schöna/Sächsische Schweiz 1995, o.S.
  • D. Ma, P. R. Sahm
    Untersuchung des Erstarrungsvorgangs der gerichtet erstarrten Superlegierung CMSX 6
    Zeitschrift für Metallkunde 86 (1995) 11, S. 764-768
  • N. Hofmann
    Efficient enmeshment of complex blade geometries including the ceramic shell mould
    Automatic finite element mesh generation for industrial use. (VTT research notes ; 1707), p. 81-89
  • N. Hofmann, J. Neises, F. Hediger, U. Proff
    Numerical simulation of radiation-heated mobile casting moulds
    Computing Systems in Engineering, Vol. 6 (1995) No. 1, pp. 73-81
  • Frank Busse
    Numerische Modellierung des Transportes einer Pulverschüttung in einem Rohrofen am Beispiel von Siliziumnitrid-Pulver
    Diplomarbeit, 1995
  • N. Hofmann
    Simulation von Wärmestrahlung am Beispiel des Bridgman-Verfahrens zur gerichteten Erstarrung von Turbinenschaufeln
    Fortschritt-Berichte VDI, Reihe 5, Grund- und Werkstoffe, Nr. 414, Düsseldorf : VDI-Verl., 1995, Dissertation RWTH Aachen 1995
  • I. Steinbach, J. Neises
    A Control Volume Treatment of Finite Elements and its Applications to a Solidification Problem
    Proc Int. Conf. Numerical Methods in Thermal Problems. Ed. by R.W.Lewis, P. Durbetaki, Pineridge Press U. K. (1995) p. 466-473
  • D. Franke, I. Steinbach, W. Krumbe, J. Liebermann, W. Koch
    Numerical modeling of the dislocation density of high quality cast silicon ingot material
    Proc. 13th European Photovoltaic Solar Energy Conference, Nice 1995, pp. 458-460
  • F. Hediger, N. Hofmann, P. R. Sahm
    Numerical simulation of directional solidification for large turbine blades including validation and optimization of process parameters and microstructure
    Cost 501-II, Working Package 1, Advanced Blading for Gas Turbines, Final Report. Ed. by P. J. L. Mériguet, Bruxelles 1994, p. 391
  • I. Steinbach, D. Franke, W. Krumbe, J. Liebermann
    A Virtual Crystallization Furnace for Solar Silicon
    Proc. 1st World Conference on Photovoltaic Energy Conversion, 1994 IEEE, Waikoloa, Hawaii, 05.-09.12. 1994, p. 1270-1273
  • D. Franke, I. Steinbach
    Calculation of thermal stresses during the soldering of solar cell strings
    Proc. 1st World Conference on Photovoltaic Energy Conversion, 1994 IEEE, Waikoloa, Hawaii, 05.-09.12. 1994, pp. 1458-1461
  • N. Hofmann, F. Hediger
    Computerunterstütztes "teach-in" für Bridgman-Gießanlagen
    Symposium Materialforschung - Neue Werkstoffe des BMFT, 2.-4. Nov. 1994, Würzburg: PLR, Nachtrag zum Tagungsband
  • M. Balliel
    Transient Behaviour for the Formation of Primary Dendrite Arms
    J. de Physique IV 3 (1993) 7, pp. 841-846
  • A. Ludwig, I. Steinbach, N. Hofmann, M. Balliel, M. van Voerkom, P. R. Sahm
    Modelling of Undercooling Effects during the directional Solidification of Turbine Blades
    Modeling of Casting, Welding and Advanced Solidification Processes VI. Ed. by T. S. Piwonka, V. Voller, L. Katgerman, Warrendale: TMS 1993, p. 87-94
  • P. M. Host
    Simulation freier konvektiver Transportvorgänge bei der gerichteten Erstarrung binärer Systeme
    Fortschritt-Berichte VDI, Reihe 5, Grund- und Werkstoffe, Nr. 256, Düsseldorf: VDI-Verlag 1992
  • U. Reske, A. Bader, N. Hofmann, P. R. Sahm
    Numerische Simulation der gerichteten Erstarrung nach dem Bridgman Verfahren II
    Giessereiforschung 44(1992)3, S.113-120
  • G. Zimmermann, J. Otten, N. Hofmann
    Numerically Simulated Temperature Fields in a Gradient Furnace Modelling the Microgravity Environment
    Interactive Dynamics of Convection and Solidification. Ed. by S. H. Davis, H. E. Huppert, U. Müller, Dordrecht: Kluwer 1992, p. 187-189
  • N. Hofmann, U. Reske, H. Vor, P. R. Sahm
    Numerische Simulation der gerichteten Erstarrung nach dem Bridgman Verfahren I
    Giessereiforschung 43(1991)3, S.101-106
  • F. Hediger, N. Hofmann
    Process simulation for directionally solidified turbine blades of complex shape
    International Conference on Modeling of Casting and Welding Processes V. Ed. by M. Rappaz, M. R. Özgü, K. W. Mahin, Warrendale: TMS 1991, p. 611-619
  • I. Steinbach, T. Berrenberg
    Numerical simulation of the continuous strip coating process
    Modeling of Casting and Welding Processes V. Ed. by M. Rappaz, M. R. Özg, K. W. Mahin, Warrendale: TMS 1991, p. 653-658
  • F. Hediger, N. Hofmann
    Numerical Modeling of Vacuum Investment Casting Processes for Large DS-SC Turbine Blades
    Conf. High Temperature Materials for Power Engineering 1990, Liege, Belgien, CRM
  • W. Schäfer, F. Hediger, A. Bührig-Polaczek
    Numerical Modelling of Heat Transfer at an Interface - Finite Element Approach, Testing and Examples
    Euromat '89: European Conference on Advanced Materials and Processes, Aachen, 22.-24.11. Ed. by H. E. Exner, V. Schumacher, Oberursel : DGM 1989, p. 121-127
  • F. Hediger
    Rechnerische Simulation und Meßwerterfassung zur Prozeßoptimierung der gerichteten und einkristallingerichteten Erstarrung von Superlegierungen
    Fortschritt-Berichte VDI, Reihe 2, Fertigungstechnik, Nr. 158, Düsseldorf : VDI-Verl., 1988, Dissertation RWTH Aachen 1988