Access

Publications - By Year

2006

  • B. Böttger, V. Witusiewicz, S. Rex
    Phase-field method coupled to CALPHAD: Quantitative comparison between simulation and experiments in ternary eutectic In-Bi-Sn
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 425-432
  • J. Eiken, B. Böttger, I. Steinbach
    Phase field simulations of microstructure evolution during solidification of magnesium-based alloys
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 489-496
  • M. Apel, H.-J. Diepers, I. Steinbach
    On the effect of interdendritic flow on primary dendrite spacing: a phase field study and analytical scaling relations
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 505-512
  • J. Jakumeit, R. Laqua, M. Peric, E. Schreck
    Fully coupled multi-phase mold-filling and solidification simulation of industrial casting processes
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 63-70
  • N. Dupin, S. G. Fries, J. M. Joubert, B. Sundman, M. H. F. Sluiter, Y. Kawazoe, A. Pasturel
    Using first-principles results to calculate finite-temperature thermodynamic properties of the Nb-Ni mu phase in the Bragg-Williams approximation
    Philosophical Magazine 86 (2006) 12, pp. 1631-1641
  • I. Steinbach, M. Apel
    Multi phase field model for solid state transformation with elastic strain
    Physica D 217 (2006) 2, pp. 153-160
  • M. Rotter, A. Grytsiv, X.-Q. Chen, P. Rogl, R. Podloucky, W. Wolf, V. T. Witusiewicz, A. Saccone, H. Noel, M. Doerr, A. Lindbaum, H. Michor, E. Bauer, S. Heathman, W. Kockelmann, J. Taylor
    Structural, thermodynamic, and transport properties of Laves-phase ZrMn2 from x-ray and neutron diffraction and first principles
    Physical Review B 74 (2006) 224109
  • J. Eiken, B. Böttger, I. Steinbach
    Multiphase-field approach for multicomponent alloys with extrapolation scheme for numerical application
    Physical Review E 73 (2006), 066122
  • T. Bähr, M. Apel, M. Ghosh
    Analysis of grain size and grain orientation in mc-Si wafer produced by ingot casting
    Proceedings of the 21th European Photovoltaic Solar Energy Conference, 4-6 September 2006, Dresden, pp. 584-587
  • G. Laschet, S. Rex, D. Bohn, R. Krewinkel
    3-D numerical analysis of curved transpiration cooled plates and homogenization of their aerothermal properties
    Proceedings of the ASME Turbo Expo 2006 - Power for Land, Sea, and Air, Volume: 3A, New York : ASME, 2006, pp. 395-406
  • S. Benke, G. Laschet
    A thermo-mechanical 2-phase finite element model for the coherent mushy zone relevant to casting
    Proceedings of the III. European Conference on Computational Mechanics, Structures and Coupled Problems in Engineering (Lisbon, June 5-8, 2006), ed. by C.A. Mota Soares (et al.), Springer Netherland (2006), p. 534
  • S. Benke
    Modeling of solid state transformations using a phase field model with transformation plasticity
    Proceedings of the III. European Conference on Computational Mechanics, Structures and Coupled Problems in Engineering (Lisbon, June 5-8, 2006), ed. by C.A. Mota Soares (et al.), Springer Netherland (2006), p. 57
  • L. Ratke, S. Steinbach, G. Müller, M. Hainke, A. Roosz, Y. Fautrelle, M. D. Dupouy, G. Zimmermann, A. Weiß, H.-J. Diepers, J. Lacaze, R. Valdes, G.-U. Grün, H.-P. Nicolai, H. Gerke-Cantow
    MICAST - Microstructure formation in casting of technical alloys under diffusive and magnetically controlled convective conditions
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 131-144
  • H.-J. Diepers, I. Steinbach
    Interaction of interdendritic convection and dendritic primary spacing: phase-field simulation and analytical modeling
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 145-150
  • G. Zimmermann, A. Weiß
    Microstructure formation in AlSi7 alloys directionally solidified with forced melt flow
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 227-232
  • Ch.-A. Gandin, B. Billia, G. Zimmermann, D. J. Browne, M.-D. Dupouy, G. Guillemot, H. Nguyen-Thi, N. Mangelick-Noel, G. Reinhart, L. Sturz, S. Mc Fadden, J. Banaszek, Y. Fautrelle, K. Zaidat, A. Ciobanas
    Columnar-to-equiaxed transition in solidification processing: a project of the European Space Agency - Microgravity Applications Promotion Program
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 393-404
  • L. Sturz, G. Zimmermann
    Investigations on columnar-to-equiaxed transition in binary Al alloys with and without grain refiners
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 419-424
  • J. Dagner, A. Weiß, M. Hainke, G. Zimmermann, G. Müller
    Global modeling of directional solidification processes of binary and ternary aluminum alloys using the software package CrysVUn
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 437-442
  • A. Weiß, L. Sturz, G. Zimmermann
    Investigation on the morphological instability during directional solidification of a transparent alloy during sounding rocket flights
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 463-472
  • S. Rex, U. Hecht, A. Drevermann
    Experimental performance within the SCA prototype test 1 using ESA's solidification and quench furnace (MSL-SQF) on ground
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 485-490
  • U. Hecht, V. T. Witusiewicz, A. Drevermann, B. Böttger, S. Rex
    Eutectic solidification of ternary Al-Cu-Ag alloys: coupled growth of alpha(Al) and Al2Cu in univariant reaction
    Solidification and Gravity IV, proceedings of the Fourth International Conference on Solidification and Gravity, Miskolc, Hungary, September 6 - 9, 2004 (Materials Science Forum ; 508), 2006, pp. 57-62
  • J. Aguilar, C. Grüneberg
    Elektromagnetisch induzierte Seigerung von Primärsiliciumpartikeln zur Erzeugung eines gradierten Gefüges bei im Niederdruckgussverfahren verarbeiteten übereutektischen AlSi-Legierungen
    Vom Werkstoff zum Bauteilsystem : [4. Ranshofener Leichtmetalltage 2006, 17.- 18.10.2006], ed. H. Kaufmann, Ranshofen : LKR-Verl., 2006, S. 59-65
  • A. Grytsiv, X.-Q. Chen, V. T. Witusiewicz, P. Rogl, R. Podloucky, V. Pomjakushim, D. Maccio, A. Saccone, G. Giester, F. Sommer
    Atom order and thermodynamic properties of the ternary Laves phase Ti(TiyNixAl1-x-y)2
    Zeitschrift für Kristallographie 221 (2006), 334-348
  • H. Behnken, D. Franke, H. Kasjanow, A. Nikanorov, A. Seidl
    3D-simulation of EFG process and deformation of the growing silicon tube
    2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, Waikoloa, Hawaii, 7 - 12 May 2006, pp. 1175-1178
  • H. Behnken, D. Franke
    Time dependent fracture behaviour in fast mechanical testing of silicon wafers
    2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, Waikoloa, Hawaii, 7 - 12 May 2006, pp. 1207-1210
  • G. Zimmermann, L. Sturz, J. Dagner
    Directional solidification of AlSiMg0.3-alloys in a rotating magnetic field
    5th International Conference on Electromagnetic Processing of Materials (EPM 2006), October 23-27, 2006, Sendai, Japan: The Iron and Steel Institute of Japan, pp. 375-380
  • K. Nakajima, M. Apel, I. Steinbach
    The role of carbon diffusion in ferrite on the kinetics of cooperative growth of pearlite: a multi-phase field study
    Acta Materialia 54 (2006) 3665-3672
  • B. Böttger, J. Eiken, I. Steinbach
    Phase field simulation of equiaxed solidification in technical alloys
    Acta Materialia 54 (2006), pp. 2697-2704
  • B. Böttger, J. Eiken, M. Ohno, G. Klaus, M. Fehlbier, R. Schmid-Fetzer, I. Steinbach, A. Bührig-Polaczek
    Controlling microstructure in magnesium alloys: a combined thermodynamic, experimental and simulation approach
    Advanced Engineering Materials 8 (2006) 4, pp. 241-247
  • R. Herzog, N. Warnken, I. Steinbach, B. Hallstedt, C. Walter, J. Müller, D. Hajas, E. Münstermann, J. M. Schneider, R. Nickel, D. Parkot, K. Bobzin, E. Lugscheider, P. Bednarz, O. Trunova, L. Singheiser
    Intergrated approach for the development of advanced, coated gas turbine blades
    Advanced Engineering Materials 8 (2006) 6, pp. 535-562
  • J. Jakumeit
    Grid-basierte Simulation für die Gießerei-Industrie
    Grid Computing, ed. by T. Barth [et. al.], Wiesbaden : Vieweg, 2006, S. 133-142
  • J. Jakumeit, T. Barth, J. Reichwald, M. Grauer, F. Thilo, T. Friese, M. Smith, B. Freisleben
    A grid-based parallel otimization algorithm applied to a problem in metal casting industry
    International Conference on Bioinspired Optimization Methods and their Applications, BIOMA '06, Ljubljana, Slovenia, 2006, pp. 131-146
  • V. T. Witusiewicz, U. Hecht, N. Warnken, S. G. Fries, W. Hu
    Analysis of phase formation in Ni-rich alloys of the Ni-Ta-W system by calorimetry, DTA, SEM, and TEM
    International Journal of Materials Research 97 (2006) 4, pp. 440-449
  • X. Yan, X.-Q. Chen, A. Grytsiv, V. T. Witusiewicz, P. Rogl, R. Podloucky, V. Pomjakushin, G. Giester
    Site preference, thermodynamic, and magnetic properties of the ternary Laves phase Ti(Fe1-xAlx)2 with the crystal structure of the MgZn2-type
    International Journal of Materials Research 97 (2006) 4, pp. 450-460
  • V. T. Witusiewicz, S. G. Fries, U. Hecht, A. Drevermann, S. Rex
    Enthalpies of formation measurements and thermodynamic description of the Ag-Cu-Zn system
    International Journal of Materials Research 97 (2006) 5, pp. 556-568
  • V. T. Witusiewicz, U. Hecht, L. Sturz, S. Rex
    Phase equilibria and eutectic growth in ternary organic system amino-methyl-propanediol-(D)camphor-neopentylglycol
    Journal of Crystal Growth 286 (2006) 1, pp. 137-145
  • V. T. Witusiewicz, U. Hecht, L. Sturz, S. Rex
    Phase equilibria and eutectic growth in ternary organic system (D)camphor-neopentylglycol-succinonitrile
    Journal of Crystal Growth 286 (2006) 2, pp. 431-439
  • V.T. Witusiewicz, L. Sturz, U. Hecht, S. Rex
    Phase equilibria and eutectic growth in quaternary organic alloys amino-methyl-propanediol-(D)camphor-neopentylglycol-succinonitrile (AMPD-DC-NPG-SCN)
    Journal of Crystal Growth 297 (2006) 1, pp. 117-132
  • S. Steinbach, N. Euskirchen, V. Witusiewicz, L. Sturz, L. Ratke
    The influence of fluid flow on intermetallic phases in Al-cast alloys
    Materials Science Forum 519-521 (2006), pp. 1795-1800
  • L. Sturz, A. Weiß, G. Zimmermann
    Investigations on transient directional solidification under microgravity on sounding rocket missions
    Microgravity Science and Technology 18 (2006) 3-4, pp.160-164
  • J. Jakumeit, M. Emmerich, F. Hediger
    Inverse modeling and numerical optimization of heater temperatures in a bridgman process
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 1019-1026
  • J. Jakumeit, T. Barth, M. Grauer, J. Reichwald
    Grid computing for casting simulations
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 1157-1162
  • G. Laschet, S. Benke
    On the thermo-mechanical modeling of the coherent mushy zone during solidification processes
    Modeling of Casting, Welding and Advanced Solidification Processes XI. Ed. by C.-A. Gandin (et. al.), TMS: Warrendale, 2006, pp. 177-184